![]() Remove this, while at the same time being careful not to damage the antenna wire located on the left side.Use the TR6 Torx security screwdriver to reove the six screws holding the Wi-Fi antenna/shield plate into place.Using the plastic spudger, carefully remove the plastic bottom of the Mac mini by starting at the end closest to the ports.You can have up 64GB total, or two 32Gb sticks. There are many options out there for RAM upgrades, some on Amazon ( Hynix, MemoryMasters) and more from OWC. To start, you need a few things including a TR6 Torx security screwdriver, T9 Torx screwdriver, P5 screwdriver, a plastic spudger, a pair of DDR4-2666, 1.2V, PC4-21300, unbuffered, non-ECC RAM sticks, and an anti-static wrist strap that you know how to use properly. ![]() So, if that's the case, put the RAM back in, before you head off to the Genius Bar. If you need to bring your Mac mini back to Apple for any reason, they won't do a thing with it if your RAM is installed. Importantly: this procedure does not void your warranty, however anything you break in the process does.Īlso, keep the old RAM chips. Read the procedure in full before you decide if this is something you want to do. You can destroy your new computer if you aren't careful, and it is not our fault. But look, here's the basic deal - you can break things and you will be sorry.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |